Product Description
Frankenstein Stage 1 Cylinder Heads Porting Service - LS3 / LSA 863 Cylinder Heads
*** NOTE: THIS PRODUCT IS SHIPPING YOUR EXISTING CYLINDER HEADS TO FRANKENSTEIN ENGINE DYNAMICS TO BE PORTED AND RETURNED ONCE COMPLETED ***
Frankenstein Engine Dynamics OEM and Aftermarket Cylinder Head Performance Porting
- FED .700 Lift Dual Spring Kit
- Reuse Stainless Steel Valves
- Service Sold Per Set
FED specializes in high performance cylinder head porting for racing engine applications. OEM and Aftermarket heads enter FED’s advanced manufacturing processes proven to generate the most efficient power in every application. We take great pride in our work and our attention to detail is unmatched in this industry. With over 100 years of combined team experience we know how to Win! FED’s Porting Process Includes:
- Teardown/Clean/Inspect
- FED’s exclusive high performance porting programs via 5-Axis CNC – Intake/Exhaust/Chambers (Some Chambers Don’t Apply)
- Pressure Tested for Leak Detection
- Precision Newen CNC Valve Job, which ensures near zero runout
- All Cylinder Head Sealing Surfaces Including Ends are PCD Machined, Making Sure all Surfaces are True
- Meticulous Hand Blending and Deburr
- PCD Surfacing Optimal For Modern MLS Head Gaskets
- Final Wash and Assembly
- Extreme Attention to Detail and Quality Control at Every Stage
Lead Times:
- LEAD TIMES MAY VARY. You can drop off your heads or ship them to us.
Specifications
Description
|
Specification
|
Part Number
|
Min. Bore Dia.
|
4.000″
|
|
Intake Port Volume
|
286cc
|
|
Exhaust Port Volume
|
92cc
|
|
Combustion Chamber Volume
|
70cc
|
|
Intake Valves
|
Reuse Stock Valves
|
|
Exhaust Valves
|
Reuse Stock Valves
|
|
Valve Springs
|
.700″ Lift FED exclusive by PAC
|
914005
|
Retainers
|
FED Ti-64 Retainer – Dual Spring
|
914040
|
Valve Locks
|
GM Valve Lock
|
916051
|
Valve Seals
|
Viton High Heat Seal .311/.500/8mm
|
SPRVS805USS
|
Rocker Stands
|
Stock Rockers or Jesel. Smith Brothers Trunnion Upgrade Kit Recommended
|
General Recommendations for Frankenstein Cylinder Heads:
o Pushrods – Please make sure to properly check pushrod length and wall clearance. We recommend a clearance of at least .030” between the pushrod and the wall. Please do not clearance the pushrod holes any further. We have a minimum port thickness required to pass QC and that is set at our facility. Every lifter brand and style use a different pushrod length, so make sure to properly check the length needed for your application.
o Surfacing – Flat or angle milling will affect flow numbers and may require a thicker intake gasket. The intake manifold will also need to be corrected to match the intake ports for optimal performance.
o Boosted/Nitrous Applications – With any power adder applications comes increased stress and longevity issues for the valvetrain. We highly suggest the use of Inconel exhaust valves in any power adder combos. We also suggest our upgraded valve spring kits to help properly control the valve train in these stressful conditions.
o All MARINE Applications – We strongly recommend Inconel exhaust valves & also offer a hard-anodized coating to slow the effects of corrosion. Please see note on guide clearance below.
o Valve Guide Clearance – Your FED Heads come with proper guide clearance for most applications. Boosted/Nitrous or marine applications might require additional clearance and it is the customer’s responsibility to verify proper clearance in these applications.
o Valve Springs – Forced induction, nitrous oxide and cams with aggressive ramp rates may require additional spring pressure. We offer upgraded valve springs for these types of applications. FED also recommends the use of billet 8620 cam cores and high-quality lifters. VALVE SPRINGS MAY NOT BE COMPATIBLE WITH YOUR CAMSHAFT COMBINATION. PLEASE CHECK BEFORE ENGINE ASSEMBLY. IMPROPER SPRING AND CAMSHAFT COMBO CAN CAUSE SEVERE DAMAGE.
o Piston to Valve – FED assumes no responsibility for damage if the end user builds an engine without properly verifying he has enough piston to valve clearance (depth and radial clearance both checked). We recommend a minimum depth of .080″ on the intake valve and .100″ on the exhaust with a radial clearance of .030″ minimum around the perimeter of each valve. Just checking depth is not enough, the position of the valve pocket must also be addressed. It is the customers responsibility to verify proper piston to valve clearance.
o CNC Porting – Occasionally a 100% CNC ported head might have a very small area left “as cast”, this in no way affects performance.
o Valve Spring Installed Heights – FED valve spring installed height spec is +/- .015” which is the smallest shim available for adjustment. This small of a difference will have no issues and should be of no concern.
o Stock GM Rocker Arms – GM Rocker Arms are not designed/engineered to endure aggressive aftermarket cams or higher spring pressures/rates. At a minimum FED recommends using CHE Bushing Trunnion Kits. Without the proper parts you will experience accelerated guide wear over an extended period.
o O-Rings – O-rings will wear out over time. Removal of components, such as headers for example, may cause O-rings to wear faster. We highly recommend a thorough inspection of any O-rings during removal and prior to installation. Worn or damaged O-rings should be replaced.
o Head Stud Sizes- Make sure to get the proper head stud diameter and length for your head and block combo.
Lead Times - FED lead times vary from 3 to 6 weeks, and even longer at peak season. Is it worth the wait?
- FED PORTING SERVICES ARE NOT TYPICAL – Porting services use the same standards and processes we use for ProMod®, NASCAR® and NHRA®. These standards produce the best high performance induction systems in the world based on reliability, consistency, combustion efficiency and horsepower.
- EXCLUSIVE PORT PROGRAMS – 100% of FED’s advanced port programs are developed in-house and tested to achieve performance objectives for velocity, density, pressured and flow at each stage of the combustion process. Performance outcomes are developed in context of the induction system using Reactive Airflow Modeling and then validated on the engine application.
- MUCH MORE THAN PORTING –The vast majority of FED customers buy assembled heads. Why? Absolute precision. Every step of FED’s machining requires exceedingly tight tolerances for rock solid valve train stability. The deck, valve job and spring seats are machined true to ensure precise valve tip heights, uniform install heights for exacting spring pressures and zero runout. FED uses the highest quality components to meet critical quality standards which are re-verified pre and post assembly to +/- .005″ and every port is vacuum tested.
- WHY THE EXTREME ATTENTION TO DETAIL –The assembled cylinder head is the linchpin responsible for keeping harmony between cam, lifter, pushrod, rocker, springs and valves while ensuring valves open and close flawlessly from from low to high rpms. Customers appreciate the outcomes of our obsessive attention to detail. FED’s commitment to tight tolerances ensure ideal spring pressures, higher combustion efficiency and valve train stability.
FED cylinder heads demonstrate more power on the track because we invest time executing hundreds of small details that others overlook.
